Antminer T17+ Plus All-in-one Heatsink

This upgrade heatsink is used to repair and replace the Antminer T17+ hash board with a large number of heatsinks dropped. When the hash board of your miner fails to work properly, you need to check the cause of the failure. If it is found that the short circuit is caused by the missing heat sink, the chip is burned, and replacing the heat sink or ASIC chip cannot fundamentally solve the problem, and maintenance work Long lasting and expensive. To properly conduct heat from the chip, modifying and upgrading the heat sink is more conducive to increasing mining revenue and reducing losses. Using the Antminer T17+ to upgrade the heat sink can help the miner run more stable and ship well.

Sop (Standard Operating Procedure)

1. Remove the heat sink

2. Remove the tin from the chip

3. Clean the dust

4. Cleaning pads

5. Fasten the tin-plated nut (hole facing down) on the pad

6. Fasten the heatsink on the board (thermal paste / pad - on board - set washer - screw)