Automatic tin feeding gun, power up to 80W,voltage 220V 50HZ ,match with lead-free solder wire with a diameter of 1.0-1.55mm. Preheat time 2-4 minutes, use internal mica heating, lead-free soldering iron tip, stainless steel tube sleeve. The two side doors can be opened from the outside so that you can always pay attention to the internal operation, and it is easy to disassemble. One-handed operation improves work efficiency. The tin wire rack is detachable and easy to carry when going out for maintenance.

Instructions:

1. First straighten the solder wire, then press the tin hole to penetrate the solder wire.

2. Remove the tin wire shaft screw, put it in the tin wire coil, and Put on the screws.

3. After confirming that the tin is normal, it can be powered on for welding.

(Dip some rosin before welding, the welding will be smoother)

There are red and yellow colors, random delivery