Fuji NE8800K red glue, no floating, no offset, no part drop, thrust up to 5kg, high strength adhesive force, good effect on large components, no part drop.this product is a heat-curing epoxy resin adhesive, stable in storage, easy to use, fast curing, good in strength, good in thixotropy, and good in electrical insulation. glue and scraping glue.

red glue has the following characteristics: low-temperature hardening, despite the ultra-high-speed application, can maintain a stable shape without drawing in a small amount of application and collapse. stable adhesion strength can be obtained for various parts that show adhesion, excellent storage stability, high heat resistance, and excellent electrical characteristics, which can also be used for printing.

recommended hardening conditions: 60 seconds after the surface temperature of the substrate reaches 150°C, 100 seconds after reaching 150°C, the higher the hardening temperature and the longer the hardening time, the higher the strength can be obtained.the actual temperature of the adhesive applied varies depending on the size of the parts to be mounted on the substrate and the mounting position, so it is necessary to find the most suitable curing conditions.

Instructions for use:

In order to maximize the effect of the characteristics of the adhesive, be sure to store it in a refrigerator (2℃~10℃).

when taking it out of the refrigerator for use, please wait until the temperature of the adhesive has completely returned to room temperature before use.

adding a plunger to the dispensing tube can make the dispensing volume more stable.

to prevent the occurrence of wire drawing, the most suitable setting temperature for dispensing is 30℃~38℃.

when filling the cylinder into the hose, please use a special automatic filling machine to prevent the penetration of air bubbles.

DBE or ethyl acetate can be used for dispensing tube washing.