Updates:

1. Resolved the issue of hashboards dropping under low and normal temperature conditions.

2. Fixed some common bugs.

Please note:

For KS3M/3L, if your mining farm is in harsh cold conditions, we recommend that the ambient temperature before the machine starts should be above 0°C, i.e., the temperature at the air inlet should be above 0°C. If the ambient temperature is below 0°C, i.e., the temperature at the air inlet is below 0°C, we strongly recommend that you upgrade the machine to the latest firmware before running. After the upgrade, please run the machine for at least three hours and observe if the issues are resolved.

1.Strictly follow the model-specific upgrades: Firmware upgrades should only be applied to the corresponding machine model. Customers will be responsible for any consequences resulting from upgrading with incompatible firmware.

2.Download official firmware: Please make sure to download firmware from our official website and do not use firmware from unofficial sources. Customers will be liable for any consequences resulting from using unofficially provided firmware.

3.Follow the user manual: Please carefully read and follow the instructions provided in our user manual for firmware upgrades to ensure correct operations.

4.Incremental upgrades: If you have multiple machines, it is recommended to first upgrade one of them and observe if the machine runs stably after the upgrade. Only proceed to upgrade other machines once stability is confirmed to reduce potential risks.

5.If the machine experiences any abnormalities during the upgrade process, please restore it to factory settings.

6.This firmware version is a beta test version. If any abnormal conditions occur after the upgrade, please promptly contact us through the official website support ticket.

7.After downloading the firmware, please unzip it and verify that the MD5 checksum is correct before proceeding with the upgrade. The upgraded package, after extraction, will have the file extension “.bgz.”

8.If the machine is functioning normally, it is not recommended to upgrade to a new firmware version.

优化内容:

1.解决低温常温情况下机器的掉板问题。

2.修复一些常见BUG。

注意:

针对KS3M/3L机型,如果用户矿场环境处于恶劣低温情况，我们建议机器开机前环境温度应该大于0℃，即进风口温度大于0℃。如果环境温度低于0℃，即进风口温度低于0℃，强烈建议您将机器升级至最新固件后再运行。升级后请运行至少三个小时以上，观察机器问题是否修复。

1. 严格按照机型升级：固件只能升级对应的机型。如果由于升级不对应的固件造成的后果，将由客户承担。

2. 下载官方固件：请务必在我们官方网站下载固件，不要使用非官方来源发送给您的固件。如果使用非官方提供的固件造成的后果，将由客户承担。

3. 遵循操作手册：请仔细阅读并按照我们提供的操作手册中的指示来进行固件升级，确保操作正确。

4. 逐步升级：如果您有多台机器，建议先升级其中一台，并观察升级后机器是否稳定运行。只有在确认稳定后再升级其他机器，以降低潜在风险。

5. 如果升级过程中机器出现异常，请恢复出厂设置。

6. 此固件版本为beta测试版，如升级后有任何异常状况，请及时通过官网support ticket与我们取得联系。

7. 下载固件后，请先解压、校验MD5无误后，再进行升级。解压后升级包后缀名为“.bgz”。

8. 如果机器工作正常，不建议升级新固件。