Video Upload Q&A Likes Trends
@Ada
T19 Hydro Server Installation Guide
@Ada
S19 Hydro Server Installation Guide
@Ada
S19 XP Hyd. Server Installation Guide
@Ada

Measure the voltage of the ground-fire. If it is more than 100V, the ground function must not work.

The LSTime often stops after a period of time
@Ada

It may be caused by dust accumulation or the like, or the small capacitor material problem.

APW9 this part burnt, what caused this?
@Ada

Check

1, the network

2, the pool

3, the time setting

What's the error in the L3+ kernel log
@Ada

The ground terminal of USB-TTL is not connected properly to the tester.

What could be the problem causing frequent garbled output on the fixture?
@Ada

It is possible that there is an issue with the interface, or you can try reseating the CPU. Another possibility is a problem with the network socket. If there has been water damage, oxidation is more likely to occur.

The power network indicator light on/off
@Ada

LDO (Low Drop-Out) regulators supply power to the chips within a domain in the CO direction.

In which direction does an LDO provide power to the chips within a domain, the RI direction or the CO direction?
@Ada

Recommend to use coolant because it has high hot spots. It is better to use distilled water. If tap water and mineral water are used, the pump may be stuck by impurities and cannot work.

Is it possible to add coolant to the S9hydro? Is it better to add water or coolant for water-cooling?
@Ada

Should be CE BIN2

S9 SE single-board test file version (The BIN version)
@Ada

Should be CE BIN2

S9 SE single-board test file version (The BIN version)
PgUp...1617181920...PgDn
Recommend
@dlbrtclark
Other Roles
@basititraore1
Other Roles
@matty.vogt
Other Roles
@eduardocandeia
Individual Miner
@alvarosutana
Other Roles
@paulscodr
Individual Miner
Hot Topics
Lucky Miner Wi-Fi reconnect
796
Lucky miner v6
784
How To Install Bitmain S19 And S19j Pro Low Power Mode Firmware: Step-By-Step
708
See the below single-board test result. There are 8.4V,8.5V domain voltage, replacing chip 1 did not work.
649
Lucky Miner lv6
640
LTC Mining with Lucky Miner Lv06
639
As shown in the picture below, T15 machine, 58, 59, 60 are all replaced, it still doesn’t work, what’s the problem.
631
L3+ single-board test-- temperature error
608
Lucky miner LV06 breakdown
597
Cannot access IP address lucky miner
569
Hot download
Luckyminer LV06-V2.3.0_upgrade firmware 页面升级固件
981
Luckyminer LV06 factory firmware V2.1.0 页面升级固件
423
Solo Miner_Lucky Miner User Guide LV05-LV08_20231215
321
Luckyminer Management Tool
261
IceRiver_MinerTool_English_V1.0.15 (1)
94
SOLO Miner_Nerdminer USB Shape（V3）配置说明1107
79
Luckyminer LV07 Instruction and User Guide PC English
67
Luckyminer乐透机用户使用说明LV05-LV08(2023.12.15)
64
Luckyminer LV06 ESP-Prog JTAG Debug Guide_Tool kit
57
Luckyminer LV 07 Product Manual
50
No. 88, Yangzishan Road, Chengdu, Sichuan, China
Building A, Zhihui InnovationBuilding, Shenzhen, China
D-2 Seri Gembira Avenue, Kuala Lumpur, Malaysia
+86 15390421113 minerfixesofficial@gmail.com
About Us Contact Us FAQ
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved